双螺旋线圆柱凸轮机构的设计与分析

以应某企业要求设计一款用于机械手臂端部完成螺旋高速往复的机构,介绍了双滚子在螺旋线圆柱凸轮上的应用.采用解析法对机构的受力以及运动进行理论分析.利用NX10.0建模,将模型导入Adams2016输出其运动数据,对解析法结果进行验证.对设计初期得到的滚子与螺旋切槽的接触冲击进行分析,针对双滚子在运作时对螺旋切槽造成冲击大、晃动剧烈、部分零件磨损严重等问题,对圆柱凸轮机构进行优化改进,利用Adams2016软件对滚子的运动进行模拟分析.分析运算后的结果验证了改进后的机构在很大程度上实现了增加双滚子螺旋运动的平稳性能,更好的实现了双滚子与凸轮槽之间的拟合,实现了机构的平稳、高效运行.     

拉索检测爬升装置轻量化设计与动力学性能分析

斜拉桥的自动化、智能化检测是今后的发展趋势,目前已研发的拉索检测机器人都存在质量较大的问题,很难得到工程实际应用.针对课题组前期研制的第一代爬升装置样机质量大、爬升速度较慢等问题,对其进行了受力分析与静应力分析,得出了优化的可能性.提出了零件板厚为优化参数,强度变化率为约束条件的尺寸优化模型,利用差分进化算法求取最优解,得到了机架的最优板厚,同时通过拓扑优化得到各零件最佳结构,以及通过受力分析对螺栓的尺寸与数量进行了优化.优化结果表明爬升装置减重3.9kg,减重比例达到了40％,同时机架的变形量大幅减小,强度满足要求.对优化后的爬升装置进行了动力学仿真分析,结果表明最大爬升角度达到了75度,爬升速度提升了2-4倍,其动力性得到极大的改善.     

Ni1−xCoxSe2?C/ZnIn2S4 Hybrid Nanocages with Strong 2D/2D Hetero-Interface Interaction Enable Efficient H2-Releasing Photocatalysis

Designing a semiconductor-based heterostructure photocatalyst for achieving the efficient separation of photogenerated electron-hole pairs is highly important for enhancing H₂ releasing photocatalysis. Here, a new class of Ni_1−xCo_xSe₂–C/ZnIn₂S₄ hierarchical nanocages with abundant and compact ZnIn₂S₄ nanosheets/Ni_1−xCo_xSe₂^ C nanosheets 2D/2D hetero–interfaces, is designed and synthesized. The constructed heterostructure photocatalyst exposes rich hetero-junctions, supplying the broad and short transfer paths for charge carriers. The close contacts of these two kinds of nanosheets induce a strong interaction between ZnIn₂S₄ and Ni_1−xCo_xSe₂ C, improving the separation and transfer of photo-generated electron-hole pairs. As a consequence, the distinctive Ni_1−xCo_xSe₂ C/ZnIn₂S₄ hierarchical nanocages without using additional noble-metal cocatalysts, display remarkable H₂-relaesing photocatalytic activity with a rate of 5.10 mmol g⁻¹ h⁻¹ under visible light irradiation, which is 6.2 and 30 times higher than those of fresh ZnIn₂S₄ nanosheets and bare Ni_1−xCo_xSe₂ C nanocages, respectively. Spectroscopic characterizations and theory calculations reveal that the strong interaction between ZnIn₂S₄ and Ni_1−xCo_xSe₂ C 2D/2D hetero-interfaces can powerfully promote the separation of photo-generated charge carriers and the electrons transfer from ZnIn₂S₄ to Ni_1−xCo_xSe₂ C.     

Organic Semiconducting Luminophores for Near-Infrared Afterglow,Chemiluminescence, and Bioluminescence Imaging

Optical imaging has played a pivotal role in deciphering in vivo bioinformatics but is limited by shallow penetration depth and poor imaging performance owing to interfering tissue autofluorescence induced by concurrent photoexcitation. The emergence of near-infrared (NIR) self-luminescence imaging independent of real-time irradiation has timely addressed these problems. There are two main kinds of self-luminescent agents, namely inorganic and organic luminophores. Inorganic luminophores usually suffer from long-term biotoxicity concerns resulting from potential heavy-metal ions leakage and nonbiodegradability, which hinders their further translational application. In contrast, organic luminophores, especially organic semiconducting luminophores (OSLs) with good biodegradable potential, tunable design, and outstanding optical properties, are preferred in biological applications. This review summarizes the recent progress of OSLs used in NIR afterglow, chemiluminescence, and bioluminescence imaging. Molecular manipulation and nanoengineering approaches of OSLs are discussed, with emphasis on strategies that can extend the emission wavelength from visible to NIR range and amplify luminescence signals. This review concludes with a discussion of current challenges and possible solutions of OSLs in the self-luminescence field.     

Research advances in residual thermal stress of ceramic/metal brazes

Brazing, as a common method of bonding ceramic and metal, has been applied in microelectronics, aerospace, machinery and other domains extensively. The residual thermal stress in the brazed joint has direct effects on the mechanical properties of the joint, so how to control the generation of residual thermal stress has become the vital point. In this paper, the methods of reducing residual thermal stress in the brazing process in recent years are reviewed. The generation and effects of residual thermal stress in the brazed joint are introduced. Besides, the methods of detecting residual thermal stress are discussed, and different methods of reducing residual thermal stress in brazed joints are also analyzed. Finally, the future development directions of reducing residual thermal stress in the brazed joint are proposed.     

农村光棍成因及治理机制研究

以驻村扶贫点滇西南L县X村的光棍为研究对象,侧重个体精准性,强调个体因果性的特征,运用小数据分析该村光棍的贫困特征和生成原因,基于马斯洛需求层次理论探索光棍内生动力激发机制.研究表明:农村光棍趋于年轻化,形势严峻;光棍成因受到外部资源匮乏的限制,又受到自身资源缺陷的制约,内外因相互影响,但外因只有通过内因才能发挥作用.探讨通过需求原理激发光棍群体的内生动力,构建长效治理机制,让光棍群体最大限度实现人生价值,提升社会获得感和幸福感.     

Inconel 690传热管GTAW对接焊接头组织及力学性能研究

对Inconel 690传热管材进行钨极气体保护焊(GTAW)对接焊,采用拉伸试验机、压扁试验机和光学显微镜测试和分析传热管焊接接头,同时利用ANSYS软件开展焊接接头在设计工况失压时的一次应力强度校核。研究结果表明:焊缝中心为树枝胞状晶,熔合线附近为粗大柱状晶。室温时接头的平均抗拉强度为619 MPa,平均屈服强度为292 MPa,350℃时接头平均抗拉强度为475 MPa,平均屈服强度为206 MPa,拉伸接头断裂从熔合区开始贯穿整个焊缝组织,呈塑性断裂。压扁试验和反向压扁试验结果表明管接头完好。通过ANSYS分析可知,设计工况下传热管接头350℃许用应力强度150 MPa限值可满足其一次应力强度要求,且裕量较大。     

5G技术在医院智能服务中的应用

纵观当今的发展格局,是科学技术高速发展的时代。随着5G时代的来临,网络技术在各个领域中扮演着越来越重要的角色。特别是在医疗方面,为医院的日常工作奠定了坚实的基础。今天就5G网络技术在医院只能服务中的应用展开谈论。     

水杨酸处理诱导采后甜瓜抗坏血酸-还原型谷胱甘肽循环代谢清除过氧化氢的作用及机制

目的：研究抗坏血酸（ascorbic acid，AsA）-还原型谷胱甘肽（reduced glutathione，GSH）循环代谢在水杨酸处理采后甜瓜诱导的过量H2O2清除过程中的作用。方法：用4 mmol/L水杨酸浸泡‘玉金香’厚皮甜瓜10 min，测定处理后果实常温贮藏过程中丙二醛（malondialdehyde，MDA）含量，分析活性氧的积累水平、超氧化物歧化酶（superoxide dismutase，SOD）和过氧化氢酶（catalase，CAT）活力，以及AsA-GSH循环过程相关酶活力及产物和底物含量。结果：水杨酸处理降低了果实MDA含量，第10天处理组MDA含量较对照组降低14.6%；显著提高了果实O2－·的产生速率和H2O2含量（P＜0.05），其中处理后第2天O2－·的产生速率高出同期对照组的1.9 倍，第6天H2O2含量高出对照组果实29.7%；提高了果实SOD活力，但抑制了CAT活力，说明H2O2的清除可能是依赖于除酶促系统外的其他系统。此外，水杨酸处理提高了果实抗坏血酸过氧化物酶、单脱氢抗坏血酸过氧化物酶、脱氢抗坏血酸还原酶和谷胱甘肽还原酶的活力，增加了AsA和氧化型谷胱甘肽的含量，降低了脱氢抗坏血酸和GSH的含量。结论：水杨酸处理诱导了厚皮甜瓜果实的氧爆，抑制了MDA产生，由水杨酸诱导产生的过量H2O2主要依靠AsA-GSH循环系统清除。